Discussion US scuba adapter confusion

[Nocturna666]

Does anyone know what adapter to get to use with scuba right now for someone in the us? I have a nitrogen cylinder with a CGA 580 valve. The mask that I'm using and the regulator is the Neptune three and it has the second step and first step combined as mentioned with gas monkey and Slavoc guys set up. I purchased the adapter that they personally used, but wasn't taking into consideration that they were not compatible with my equipment from this country. Here is what I got so far to make reference easier. Any links or info on the adapters would be more than helpful.

 

[.ᴍᴀʏᴜ.]

Forget the SCUBA mask and regulator setup. Get an old SCBA and mask. You can find them on EBay for cheap. Remove from back harness.

You would need CGA 347 to 1/4" F.NPT thread adapter. You can find them on Amazon even.

All in all. Maybe $150 ignoring the nitrogen. SCBAs almost exclusively use CGA 347 so that they can use oxygen bottles from anywhere incase of emergency.

The SCBAs harness and mask has both the high and low pressure regulators between the two.

I use an old SCOTT 4.5 with E-Z FLO regulator. I have experience in a related field with this equipment and know for a fact that it will work as intended.

Be sure to use thread tape or sealant during assembly to prevent pressure loss.

Disclaimer: Life might be shit right now, or maybe you just like having the option(like me) but please exhaust every other option first. This is an extremely lethal option because it's near impossible to mess up. You will black out within a couple breathes so please be careful. I've tested it on myself extensively. I am not recommending suicide as a solution to your issues in the least, I simply believe that this information should be accessible.

You are not alone, make your voice heard, feeling seen and having your struggle acknowledged can truly help. I'm in a professional residential treatment facility (nice house) and the support is actually making a difference.

Lots of love XOXO

- Mayu

 

[Nocturna666]

Forget the SCUBA mask and regulator setup. Get an old SCBA and mask. You can find them on EBay for cheap. Remove from back harness.

You would need CGA 347 to 1/4" F.NPT thread adapter. You can find them on Amazon even.

All in all. Maybe $150 ignoring the nitrogen. SCBAs almost exclusively use CGA 347 so that they can use oxygen bottles from anywhere incase of emergency.

The SCBAs harness and mask has both the high and low pressure regulators between the two.

I use an old SCOTT 4.5 with E-Z FLO regulator. I have experience in a related field with this equipment and know for a fact that it will work as intended.

Be sure to use thread tape or sealant during assembly to prevent pressure loss.

Disclaimer: Life might be shit right now, or maybe you just like having the option(like me) but please exhaust every other option first. This is an extremely lethal option because it's near impossible to mess up. You will black out within a couple breathes so please be careful. I've tested it on myself extensively. I am not recommending suicide as a solution to your issues in the least, I simply believe that this information should be accessible.

You are not alone, make your voice heard, feeling seen and having your struggle acknowledged can truly help. I'm in a professional residential treatment facility (nice house) and the support is actually making a difference.

Lots of love XOXO

- Mayu

Thank you for the detailed reply, that was quite informative. Best of luck to you and your path in life Mayu to success and continual support.

 

[endlesstranquility]

Umm, get in an airtight room, start Lifestream , then open the valve? Not hard

 

[Nocturna666]

Umm, get in an airtight room, start Lifestream , then open the valve? Not hard

I initially thought that too when hearing about this tactic but if only it was a simple as that. lol you have to have some sort of mask, bag, etc depending on what method your going with to contain the gas and not mix it with a oxygenated environment.

Forget the SCUBA mask and regulator setup. Get an old SCBA and mask. You can find them on EBay for cheap. Remove from back harness.

You would need CGA 347 to 1/4" F.NPT thread adapter. You can find them on Amazon even.

All in all. Maybe $150 ignoring the nitrogen. SCBAs almost exclusively use CGA 347 so that they can use oxygen bottles from anywhere incase of emergency.

The SCBAs harness and mask has both the high and low pressure regulators between the two.

I use an old SCOTT 4.5 with E-Z FLO regulator. I have experience in a related field with this equipment and know for a fact that it will work as intended.

Be sure to use thread tape or sealant during assembly to prevent pressure loss.

Disclaimer: Life might be shit right now, or maybe you just like having the option(like me) but please exhaust every other option first. This is an extremely lethal option because it's near impossible to mess up. You will black out within a couple breathes so please be careful. I've tested it on myself extensively. I am not recommending suicide as a solution to your issues in the least, I simply believe that this information should be accessible.

You are not alone, make your voice heard, feeling seen and having your struggle acknowledged can truly help. I'm in a professional residential treatment facility (nice house) and the support is actually making a difference.

Lots of love XOXO

- Mayu

Oh, so one more thing. being that I already have the regulator and scuba mask and since it is a method that I'm more comfortable with than scba (not saying that isn't a good or pliable option) would the adapter still work in terms of fitting?

 

[endlesstranquility]

I initially thought that too when hearing about this tactic but if only it was a simple as that. lol you have to have some sort of mask, bag, etc depending on what method your going with to contain the gas and not mix it with a oxygenated environment.

Oh, so one more thing. being that I already have the regulator and scuba mask and since it is a method that I'm more comfortable with than scba (not saying that isn't a good or pliable option) would the adapter still work in terms of fitting?

You know, if there is a will there is a way? Ask a friend to hit you really hard in the head with that Red stuff! :DDDD

 

[.ᴍᴀʏᴜ.]

I initially thought that too when hearing about this tactic but if only it was a simple as that. lol you have to have some sort of mask, bag, etc depending on what method your going with to contain the gas and not mix it with a oxygenated environment.

Oh, so one more thing. being that I already have the regulator and scuba mask and since it is a method that I'm more comfortable with than scba (not saying that isn't a good or pliable option) would the adapter still work in terms of fitting?

I don't know if it will or not. Sorry! I will add though that SCUBAs and SCBAs are virtually identical aside from intended operating environment.

XOXO

- Mayu